AV4-CP-AV419285 - HDMI Over CAT5 Wallplates With IR Repeater
These hdmi over CAT5 plates can be used to send high definition sources over standard CAT5/5e/6 network cables. It will also allow you to control sources in a different location using IR. A good example of usage for this plate would be sending hdmi signals to a bedroom from the main equipment in the lounge. From the bedroom the equipment such as a sky hd box or bluray player can be controlled using the original IR remote control. The use of network cable saves expensive long runs of hdmi cable.
Both transmitter and receiver plates are included in this kit as well as the power adaptor and two 1.8m IR cables.
Send HDMI & IR signals over 2 standard UTP CAT5/5E/6 cables Standard 1G Uk Faceplates HDMI 1.3a compatible, HDCP 1.1, DDC support, EDOD, CEC & hot plug detect 480i/576i/480p/576 - 100m, 720p/180i - 70m & 1080p - 30m resolutions Built in auto EQ function Built in IR repeater function to control HDMI devices from remote side Receiver unit requires power, which can be powered at the rear of the unit via a terminal block or externally via supplied power adaptor Face plates can be flush mounted or fitted to a back box (min. 25mm deep, not supplied). Supplied with transmitter, receiver, 5v power adaptor & 2x 1.8m IR cables Rear of plates have RJ45 connections for termination.
Click here for similar items
Enter e-mail address to tell a friend about this product
|